Clean Dryer Vent With Shop Vac. Place the vent cover into hot, soapy water and use a. Next, just run your dryer for a few minutes.
If it does, let it run until it seems clear of lint and clean any that gets trapped on the vent. You can use anything from a regular vacuum with attachment to a shop vac for the job. They’re so useful) long cardboard tube or vaccuflex attachment (great for cleaning small nooks and crannies)
Dryers Are The 6Th Leading Cause Of Household Fires, Just Behind Space Heaters And Ahead Of Candles.
With the exterior vent cover off, the strong gust from the shop vac or leaf blower has the potential to dislodge the clog. The easiest way to do this is by gently moving the dryer forward to give you access to the vent in the back. If you go at it from each end, even a 10 foot hose can cover a lot of vent.
Shop Vac (If You Own Your Home, I Recommend Having One Of These.
Remove lint from the duct by hand and then vacuum the inside of the duct. The trick is having a long enough hose to do the job. Another way is to try to vacuum out the lint.
Best Bang For The Buck:
Put the cover back on and screw it back into place. Next, just run your dryer for a few minutes. You might be able to loosen the clamp by hand.
After Doing So, You Can Then Pull The Vent Off Of The Wall It’s.
Clean out the dryer vent from the outside using a vacuum. If it does, let it run until it seems clear of lint and clean any that gets trapped on the vent. Finally, go back to your dryer unit and reattach the flexible duct and the wall duct with the band clamp.
One Trick You Can Try Is To Get A Shop Vac Or Leaf Blower To Blow A Strong Gust Of Air Into The Vent Pipe.
Use a screwdriver to remove the vent cover and vacuum up any remaining debris. Remove the port cover using a drill or screwdriver. You can use anything from a regular vacuum with attachment to a shop vac for the job.
Location:
Share :
Post a Comment
for "Clean Dryer Vent With Shop Vac"
Post a Comment for "Clean Dryer Vent With Shop Vac"